It is used for the production of wound care dressing and wet pain relief paste aluminum foil four-side packaging.
• Adopt servo motors control system, precise control of product position.
•Rolling and cutting tool for high speed and high efficiency.
• Adopt high-speed flat-press hot pressing technology to ensure that each piece of packaging achieves the required fastness.
• The plaster has been applied to the previous process, and the plaster roll divided into the set width is placed on the machine material roll and fixed.
• Place the print mark aluminum foil wrapper on the wrapper material roll and secure it.
• Quickly connect to a dedicated aluminum foil-joining station when the material is used up, easy to operate, saves time and effort.
• Automatic reject function, the machine will automatically reject the non-conforming product joints, and the finished products packed in the conveyor belt are all qualified, eliminating the need for manual inspection.
• The aluminum foil wrapping paper print mark is accurate and the limit deviation is less than 0.5 mm.
• Adopt new technology to ensure that the plaster patch inside the package is not pressed against the aluminum foil seal
•Defective products are automatically removed.
•Automatically decelerate and stop before the material is used up.
Aluminium foil packaging machine DC-310N-P
|
Speed
|
420 ppm (for size 70*100mm inside, 94*145mm, aluminium foil bag)
|
Total Power
|
35KW,380V, 50HZ
|
Size:
|
Longth 5.88 M×Width 1.5M×Highth 1.9M
|
Weight:
|
5 TON
|